Non-Intrusive Inspection

non-intrusive inspection

The latest Non-Intrusive Inspection solution utilised by TRAC’s experienced technicians is a high speed, high accuracy remote access ultrasonic corrosion mapping system. It is designed to evaluate the condition of ferrous structures such as storage tanks, pipework and pipelines (6” and above), pressure vessels and other critical equipment. It can give 100% coverage in a band up to 1000mm wide, significantly increasing probability of detection (POD) of corrosion.

 

Features and Benefits

  • Fast coverage with realtime image display (2.63m per hour)
  • Very high accuracy scanning
  • High Probability of Detection (0.5mm scan grid)
  • Inspection material thickness up to 150mm
  • Very high productivity (17m2 per 8 hour shift)
  • Supports longitudinal scanning for increased productivity
  • Full off line analysis and reprocessing
  • Determination of external or internal corrosion

 

Applications

  • Localised and general pitting
  • General corrosion
  • Laminations
  • Hydrogen blistering
  • Hydrogen induced cracking
  • De-bonding of internal liners
  • Internal paint coating inspection

 

More data can be collected, in higher resolution, than ever before, increasing probability of detection. Automated methods allow full repeatability in continuous inspection regimes. The full scan is recorded, giving a permanent visual record and the scan is completed far quicker than with a traditional UT set. The unit can also be modified to carry out additional methods eg. installation of ToFD probes.

 

nosubhealth.comxanax-purchase.comshop-phentermine.comampills.com